廚具規劃：安裝工程

https://i.imgur.com/lgHFYPS.jpg

吊櫃和下櫃安裝很類似，廚具會在工廠製作完成後，以分料的狀態送到現場安裝。現場安裝像組裝樂高一樣，先把’桶身’組裝完整後，再配合五金、螺絲固定在牆面上，依照管
線需求在板材挖孔洞。而下櫃安裝則會需要’調整腳’來調整櫃子的水平，再把門片或抽
屜用鉸鏈和滑軌裝上桶身，在檯面、踢腳板安置好後，最後用矽利康收邊。

用最簡單的方式說明，當然還有很多細節沒有描述出來，每個環節都需要團隊一步一步溝通才能完成，專業需要被尊重的，發自內心覺得現場師傅都好棒。

------------------------------------------------

Kitchenware Planning: Installation Engineering

When the designer measures the planning, the drainage, water supply, and gas
pipelines need to have the exact dimensions to reduce the problems during
installation. After all, the size of the kitchenware cannot be changed when
it arrives at the site, so it is especially important to discuss and measure
it arrives at the site, so it is especially important to discuss and measure
beforehand.

Hanging cabinets are similar to the installation of lower cabinets.
Kitchenware will be sent to the site for installation after the production iscompleted. Installation is the same as assembling Lego. After the 'Barrel' isassembled, it is fixed on the wall with hardware and screws, and holes are
made on the board according to the requirements of the pipeline. The
installation of lower cabinets will require 'adjusting feet' to adjust the
level of the cabinet, and then the door or drawer will be mounted on the
barrel with hinges and slide rails. After the countertops and skirting boardsare installed, they will be finally used with Silicon.

In the simplest way to describe those, but there are many details that have
not been described. Each step requires the team to communicate step by step
to complete. The profession needs to be respected. From the bottom of my
heart, I feel that the on-site masters are the best.

#pinterestphoto
#廚房規劃
#德森規劃
#住宅設計
#空間設計
#空間設計

----------------------------------------------------
每周固定更新 歡迎按讚分享
Facebook:www.facebook.com/Anderson0192
IG:www.instagram.com/anderson12134121/

Line:circus0192

--