PTT推薦

[情報] NZXT H1 Case 安全問題警示,下架/招回?

看板PC_Shopping標題[情報] NZXT H1 Case 安全問題警示,下架/招回?作者
SamZJ
(SamZJ)
時間推噓22 推:23 噓:1 →:20

目前歐美正在過火雞節的當下,美商恩傑發表了NZXT所附的PCIE延長線
固定在PCB上的螺絲可能產生火花燒機,並提出了寄送維修套件(螺絲)
的解決辦法,目前的建議是即刻關機直到收到維修套件為止,目前還在
跟美國消費品安全委員會(CSPC)討論下一步作法是什麼

在此呼籲有用NZXT的鄉民趕快關機啊,雖然目前只有少於10台發生的案例
目前原價屋還是有上架,還在組裝的鄉民趕快停止啊,不知道Youtuber
網紅們甚麼時候會出來呼籲安全?都燒機了竟然還沒全面招回換機或維修?

以下新聞來源https://blog.nzxt.com/details-on-h1-case-safety-issue/

WHAT’S GOING ON?
We’ve identified an issue with the H1 case where a short on the PCIe riser
cable connection can lead to a potential safety hazard. This issue has
currently affected fewer than ten H1 cases.

To be extra cautious, we have paused sales on NZXT & NZXT BLD and asked
resellers to temporarily pause sales as well while our engineering team is
confirming the issue and preparing a solution.

WHAT IS THE PROBLEM?
We have identified that the two screws that attach the PCIe Riser assembly tothe chassis may cause an electrical short circuit in the printed circuit
board (PCB). Repair kits are being prepared that include two new screws that
address the issue along with instructions to replace them at home.

WHAT CAN CUSTOMERS DO?
While we have identified this issue as an extremely rare occurrence, the
absolute safest approach is to power-down your H1 until a kit is sent out to
you and the repair is made.

We will be taking customer information and providing early repair kits as
soon as this upcoming week. These kits will allow users to make the repair athome by replacing both screws that attach the PCIe assembly to the case.
Customers can reach out through our H1 dedicated contact channels included
below for more information.

WHAT ELSE DO CUSTOMERS NEED TO KNOW?
We are working closely with the US Consumer Products Safety Commission (CPSC)and the proper global authorities to ensure that we are doing everything we
can to help NZXT customers. The CPSC’s function is to help people use
products safely and we have been adhering to their strongly recommended
schedule for releasing information to our suppliers and to the public. We
take this issue seriously and are working as quickly as we can to address it.

HOW DO CUSTOMERS GET IN TOUCH IF THEY HAVE ANY OTHER QUESTIONS?
We appreciate everyone’s patience. For direct contact, customers can contact
our Customer Support team via the provided number and email address.

Please direct inquiries regarding the H1 Issue to:
Phone: 1-888-965-5520 (Mon – Fri, 8am – 6pm PST)
Email: [email protected]

--

※ PTT留言評論
※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 114.33.136.150 (臺灣)
PTT 網址

nk950357 11/29 13:11看成火花雕雞 好吃

※ 編輯: SamZJ (114.33.136.150 臺灣), 11/29/2020 13:11:55

DsLove710 11/29 13:14想吃kiara

MK47 11/29 13:16這麼酷炫的嗎?好神奇的燒機方式

avans 11/29 13:23https://i.imgur.com/6yOKXFa.jpg

圖 NZXT H1 Case 安全問題警示,下架/招回?

ronald279 11/29 13:25火了(物理

avans 11/29 13:25好像是上面那個? PCIe riser

LoveShibeInu11/29 13:25剛看到 正要翻的說哈哈哈

JapaZPa4867 11/29 13:25燒機怎麼讓螺絲產生火花?

SamZJ 11/29 13:27電線走火啦,物理性燒機發爐

LoveShibeInu11/29 13:27原文是說 pcie延長線上有兩個螺絲會造成pcie延長線

LoveShibeInu11/29 13:27的pcb短路

SamZJ 11/29 13:35Gamernexus有找到熱心的民眾,之後應該會有影片詳

SamZJ 11/29 13:35細解說

CHENXOX 11/29 13:35價崩

wellzx 11/29 13:41慘 我也有一台,雖然不常用就是了

ghour 11/29 13:42感謝

ericinttu 11/29 14:05物理燒機 給推

labiron 11/29 14:10XD熱心民眾

labiron 11/29 14:10物理上的熱心嗎

a0607152 11/29 14:26出那麼大的事該打折賣了吧

WeAntiTVBS 11/29 14:33固定在PCB上的螺絲部分 用紅紙板華司絕緣就有機會

WeAntiTVBS 11/29 14:33解決了吧(!

WeAntiTVBS 11/29 14:34紅紙板華司=以前教過鎖主機板螺絲下面要墊這個

a1379 11/29 14:45樓上說的那個好久沒看過了

ex876 11/29 14:56多買幾台放雞進去,可以開店了

maplefoxs 11/29 16:27GG

simon978 11/29 16:29H1營火

JoyRex 11/29 16:48MB那鎖腳架金屬接點到底是接地用還是要用墊片絕緣?

Severine 11/29 17:56以前記得MB都用墊片絕緣

JungSooYeon 11/29 18:26講的好像一臉你就是買H1的受害者

AreLies 11/29 18:44我現在還是有在用紅色的絕緣墊片.......

commandoEX 11/29 20:20墊片我都墊上面的說,鎖孔跟銅柱不是要接地嗎

commandoEX 11/29 20:22而且墊下面沒用吧,螺絲也是導體,通路只是從板→

commandoEX 11/29 20:23銅柱變成板→螺絲→銅柱

yeeouo 11/29 21:42這感覺像是低級失誤欸 還沒上市前應該就可以抓出來

yeeouo 11/29 21:42了吧

ahmygoddess 11/29 23:00墊紅紙那個是要避免螺絲去接觸到主機板造成短路吧

CHENXOX 11/30 00:20猜猜看立光會不會主動通知做售後 嘻嘻

yuinghoooo 11/30 08:20台灣打折也是國外原價,訂那啥曉價格

selfhu 02/01 05:01墊紅紙板華司是因為早期有的的板子沒有避開螺絲帽

selfhu 02/01 05:01緣的變通方式,但以現在來說這動作只是增加PCB接地

selfhu 02/01 05:01(電位)的阻抗而已

selfhu 02/01 05:02因為現在的都會故意在帽緣範圍內鋪地增加接觸以降

selfhu 02/01 05:02低接地阻抗